Heliport Perimeter
Light with Flood (HPLF)
The HPLF is a combination of our LED heliport perimeter light and an LED floodlight intended to "wash" the pad with light.

The perimeter light is mounted on a powder coat painted cast aluminum housing secured by a stainless steel clamp band. The fixture body finish is aviation yellow. The HPLF mounts to a standard breakable coupling. The overall height is 16.25".

Our heliport perimeter lights provide an LED based solution to the ICAO touchdown and lift-off area perimeter style of steady-burning lights. The lights are currently available in blue, green, yellow, red or clear LEDs operating at 120, 240 VAC.

LED Perimeter Light Features
• LED life rated up to 70,000 hours.
• 95% less power than an equivalent incandescent light.
• 5-watts power consumption.
• Available in blue, green, yellow, red or clear LEDs.
• Weather/corrosion resistant.
• Self contained wiring compartment eliminates additional boxes.
• Resistant to shock and vibration.
• Direct replacement for existing incandescent lighting.
• Compliant to: ICAO Annex 14, Vol II, 1999.
• 5 year warranty.

Visible/Infrared LED Option
Common LED lights can pose a hazard to pilots using Night Vision Goggles (NVGs). This is due to the fact that NVGs typically use filters to block cockpit lighting from saturating the imaging system. This has the unintended effect of making LED lights invisible to pilots. In response, we have incorporated NVG friendly technology into our perimeter light, giving pilots using night vision goggles unmatched visibility of the helipad touchdown and lift-off area (TLOF).

LED Floodlight Features
• Three multi-chip 6W, high-output, long-life, energy-efficient LEDs.
• Will deliver 70% of its initial lumens at 50,000 hours based on LM-80 tests.
• UL Listed: Suitable for wet locations - mounting within 4' (1.2M) of the ground.
• Bronze chip and fade resistant polyester powder coat finish.
• Precision die-cast aluminum housing, lens frame and mounting arm.
• Heavy-duty mounting arm with O-ring seal and stainless steel screw.
• Heatsink: Die-cast aluminum LED housing designed for maximum heat dissipation.
• Semi-specular anodized aluminum reflector.
• Metal guard to protect the lens.
• High-temperature silicone gaskets.
• Green Technology: Mercury and UV free.