Flight Light Logo Flight Light Inc.
2708 47th Ave.
Sacramento, CA 95822-3806
Toll Free (800) 806-3548
Phone (916) 394-2800
Fax (916) 394-2809
Made in the USA

Flight Light Inc.
Heliport Perimeter Light
FAA Compliant L-860

Home - Heliport Design - Heliport Lighting Packages - Product Data Sheets - Search Site

Heliport Perimeter Light
Low intensity constant voltage elevated perimeter light helps mark helipad touchdown and lift-off area (TLOF). The fixture consists of a colored Fresnel lens (globe) mounted on an aviation yellow powder coated cast aluminum lamp housing. The powdercoat finish complies with the US Military Standard Salt Fog Test conducted per MIL-STD-810E, Method 509.3, Procedure 1 for corrosion resistance. The lamp is secured by an O-ring seal and clamp band. The upper assembly mounts on a 1" EMT extension into the 1.5" NF aluminum breakable coupling. An optional 2" NPS breakable coupling is available. All of the hardware is stainless steel.

This fixture may be mounted on a base plate, junction box or stake, sold separately. The light is furnished with wire leads for wiring in the field. Most of the replacement parts are compatible with other manufacturers; consult Flight Light with specific inquires. With a low initial cost and up to 8,000 hours rated lamp life (69W), this fixture is the most economical light we offer.

Shallow Base Mounted
With this mounting option the overall installed height is less than 8 inches, complying with AC 150/5390-2B requirements for raised perimeter lights. 5" Shallow Base and 8.5" Base Plate (sold separately)

Common Replacement Parts
Part Number Description
61-861G L861-Glass Green
61-861Y L861-Glass Yellow
61-80001 L861-Clamp Band (stainless steel)
61-80002 L861-O-Ring Gasket
13-FC1.5 L861-1.5" Frangible Coupling (metal)
13-FC2.0 L861-2" Frangible Coupling (metal)
13-80004 Medium Base Socket
LA-97470 Lamp: 40 Watt, A19, 120V (1,500 rated life)
LA-15386IP Lamp: 60 Watt, A21, 230V (1,000 rated life)
LA-12496-1 Lamp: 69 Watt, A21, 120V (8,000 rated life)

Low Surface Mount
Rain and snow won't hurt these corrosion-resistant boxes. They feature a marine-grade powder coating and are UL listed and CSA certified.

The boxes are aluminum and have NPSM (National Pipe Straight Mechanical) threaded hubs in the back and sides for secure connection to conduit and fittings. They come with closure plugs for unused hubs, a grounding screw, and attachable mounting lugs. The boxes may be mounted horizontally and vertically.

Single-device (1 gang) boxes hold one toggle switch, GFCI, duplex receptacle, or other electrical device; two-device (2 gang) boxes hold two.

• Number of Hubs: 5
• Hub Trade Size: 1/2"
• Overall Size: Diameter 4-5/16", Height 2-1/4"
• Capacity: 16.5 cu. in.
• Finish: powder coating, gray

Note: Trade size refers to an industry designation for conduit and fittings and is not an actual measurement. When selecting a box, match the trade size of the conduit.

Call for your heliport lighting needs:

Home - Who We Are - Request Quote - Contact Us - Terms

Copyright © 2016 Flight Light Inc. All rights reserved.