L-867 Light Base
Compliance and Applications

FAA: AC 150/5345-42: L-867 Non-Load Bearing

Our FAA approved, non-load bearing light bases are designed for locations which experience occasional light vehicular loading, but no aircraft or other heavy vehicular load. The base typically supports an elevated taxiway light fixture and houses a powering isolation transformer. It can also be used solely as a junction box or transformer housing.

Non-Load Bearing Standard FAA L-867 Sizes:
B=12" diameter (10-1/4" bolt circle)
D=16" diameter (14-1/4" bolt circle)
E=24" diameter (14-1/4" bolt circle)

Standard Height: 24"

Material: Hot dipped galvanized steel standard. Also available in PVC, adjustable PVC and adjustable steel.

Conduit Openings: Grommets to accommodate 2" PVC standard. Hubs available. Other opening sizes are available.

Conduit Locations: Locations are designated based on a 360 degree circle as follows:

0° and 180° are standard. All conduit locations must be specified at time of order. Center of standard opening is 2-1/2" above the bottom of the light base.

Shipping Info: Shipped with 6 stainless steel bolts and a protective 1/2" thick plywood cover.

Options: Must be specified.
• Grounding: Grounding straps must be specified at time of order. Internal, external or both are available.
• Drain holes: 3/4" drain hole standard. Other sizes available. Please specify.
• Other options: Please specify as needed.