Obstruction Lights and Controls FAA L-810

Flight Light Inc.
2708 47th Ave.
Sacramento, CA 95822-3806
Toll Free (800) 806-3548
Phone (916) 394-2800
Fax (916) 394-2809

Obstruction Lights
and Controls
FAA L-810

Home - Heliport Design - Heliport Lighting Packages - Product Data Sheets - Search Site

Compliance
FAA AC: 150/5345-43F
ETL Certified L-810
ICAO Annex 14, Vol. 1

Flight Light L-810 obstruction lights are used on buildings, antennas, towers, cranes, and any other kind of obstacle which occupies airspace. Each fixture includes a glass Fresnel globe which is colored red for most applications. The fixtures are either a single or a double lamp housing and made with 3/4" or 1" internally threaded housing. A side-mounted option is also available. These obstruction lights operate on a 120V or 230V circuit. The fixture is illuminated with a 116W, A21 medium screw base lamp.

Features
• FAA approved L-810, certified and tested by ETL with a red lens and 116W lamp #32B.
• Direct installation into existing voltage power circuit.
• Direct mounting to conduit, bottom or side mounting options available.
• Photocell option for automatic activation at night.
• Optional grounding wire available.

Electronic Controls
Single and double obstruction lights can be outfitted with electronic controls to enhance the operation, automation and reduce the maintenance cycle of the fixture. Common configurations include photocells, flashers, transfer relays and alarms. Note: flashing obstruction lights are not FAA approved. Other options and custom combinations may be available upon request.

Features
• Flashers used in fixtures are set at 45 FPM, 50% duty cycle. These fixtures are not FAA certified when flashing.
• Standard configurations come with 3/4" threaded fittings. 1" threaded and side mount configurations available on request.
• FAA style photocells with a 45 second time delay prevents activation and de-activation from momentary light condition.

Common Replacement Parts
Part Number		Description
13-861R-T		Red globe with tether
61-80001		Clamp band
61-80004		Medium base socket
LA-22483-2		116W, 120V lamp
LA-116W/230V		116W, 230V lamp
61-80002		O-ring

L-810 ETL Certification (PDF, 32KB)		Red Obstruction Lighting Standards Chart FAA Style A (PDF, 507KB)
L-810 Fixture Configurations (PDF, 172KB)		Remote Control Configurations (PDF, 178KB)

Obstruction Lighting Controls
Lighting controls are designed for use when multiple obstruction light fixtures are to be controlled with common electronics or when alarms or transfer relay circuits must be switched remotely from the fixture. The electronic control module comes in a cast iron device box with threaded hubs on both top and bottom. Replacement modules (controls without device box) are also available upon request. Photocell options, available for models 81001-81004, are built into the cast iron device box. Specify "-PC1" option for 1800W photocell or "-PC2" for 4800W photocell.

Flasher

Model 81001 120VAC, 2500W, 30 FPM flasher. Includes circuitry to reduce EMI for sensitive RF locations. Beacon tower flasher. FAA approved.

Model 81002 120-240VAC, 2400W flasher. Adjustable rate flasher, 10-100 FPM.

Lamp Alarm/Transfer Relay

Model 81010 120VAC lamp alarm or transfer relay module. Monitors current for one to four 116W fixtures or one L-864 fixture with two 620W lamps. If any fixtures are detected out, 120VAC (1A) output and a 10A isolated relay (SPDT) are activated. Can be used as a transfer relay with isolated alarm for double obstruction fixtures with one primary and one standby lamp.

Model 81011 120VAC lamp alarm for two to nine lamps. Monitors current for two to nine 116W fixtures. If any fixtures are detected out, 120VAC (1A) output and 10A isolated relay (SPDT) are activated.

Photocell

Model 81020 120VAC, 1800W photocell. FAA style photocells activate at 35 ft-cd and turn off at 58 ft-cd. A 45 second time delay prevents activation and de-activation from momentary light conditions. Does not come with device box, includes 1/2" threaded male fitting.

Model 81021 120VAC, 4800W photocell. Meets FAA/FCC requirements for obstruction lighting. Energized at 35 ft-cd and de-energized at 60 ft-cd. Time delay eliminates contact chatter. Contains dual 20A load contacts. Front plastic housing mounts to cast aluminum junction box (included).

Model 81022 Hazardous Location Photocontrol Unit. Outdoor lighting control for exterior lighting in hazardous locations: explosion proof, dust-ignition proof, and weatherproof. Nominal Voltage 50/60 Hz: 120/208/240/277. Voltage Range: 105-305. Housing: sand cast copper-free aluminum - epoxy powder coated.

Call for your heliport lighting needs: 1-800-806-3548
¡Se Habla Español!

Home - Who We Are - Request Quote - Contact Us - Terms

We now accept checks via Phone or Fax. Click for details.

Copyright © 2010 Flight Light Inc. All rights reserved.
Website by Larzelere Design